EN
GENERAL INFORMATION
"HT1 type loadcells are low profile. Operating with principle of shear beam, are available in 350 or 700 ohm. It is made of a special alloy steel and it is ideal for low and middle capacity applications. HT1 load cells were designed for both tension and compression applications. The sensing element is covered with special material that isolate it from industrial environments. Stainless steel and nickel-plated HT1 loadcells are highly protected from external agents such as rain, dust, water that can make troubles for a good performance. They highly withstand to overloading and to the effects of off-axis loading.
ADVANTAGES AND USAGE AREAS
GENERAL AREAS OF US
Material testing machine
Lifting crane applications
Various weighing applications
CAPACITY
The HT1 series loadcell are produced in 1,2,5,10,20,30,50,60,100 ton capacities
CAPACITY
The HT1 series loadcell are produced in 1,2,5,10,20,30,50,60,100 ton capacities
Accuracy Class :
C1 , C3
Maximum Capacity :
1 ,2 ,5 ,10 ,20 ,30 ,50 ,60 ,100 Ton
Minimum Dead Load :
0 %CN
Rated Output :
CN 2 mV/V
Maximum Number of Load cell Interval :
nLC C1 (1000), C3 (3000)
Minimum Verification Interval :
Vmin C1 (Emax/5000 ), C3 (Emax/10000 )
Minimum Dead Load Output Return MDLOR :
DR C1 (<± 0,050), C3 (± 0,0167 ) %CN
Zero Balance :
<±1 %CN
Temperature Effect on Zero :
C1 (<± 0,014), C3 (± 0,007 ) %CN / 5 0C
Temperature Effect on Output :
C1 (<± 0,0085), C3 (± 0,0055 ) %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5 - 15 V
Input Empedance :
RLC 760+-60 Ω
Output Empedance :
RO 700+-6 Ω
Insulation Resistance :
Ris >1000 MΩ
Load Cell Body :
Nickel plated alloy steel
Environmental Protection :
IP66
Cable Type :
2X2X0,22
Cable Length :
5 m
Approval :
CE
