Overload limiter, as you can understand from the name, it is used to protect the lifting system (crane,elevator,etc.) from overloads. It can be used to pull the cables or ropes to be pulled between two poles at the desired tension.
EN
SPECIAL TYPE LOAD CELL
LPF Series Load Pin
Stock Code: 5 03 LPF
LPF loadpin loadcells are loadcells manufactured for crane systems. They are placed as a pin on the reel in the lifting mechanism of the cranes. During the lifting or lowering process of the crane, it sends the force applied by the load to the pulley as an electrical signal to the indicator or control instrument.
GENERAL INFORMATION
"Load pins are used at cranes for measurement of force on working platforms. When the crane is in active position (lifts or descends the load), the load pin shows the force applied to reel by load by sending the electrical signal to display. The load pins are used to prevent overloading on the hosting cranes.
ADVANTAGES AND USAGE AREAS
GENERAL AREAS OF USE
Overload protection for cranes (overload limiter)
CAPACITIES
LPF Series LoadCells are produced in capacities between 1-50 tons.
CAPACITIES
LPF Series LoadCells are produced in capacities between 1-50 tons.
Accuracy Class :
0,50%
Maximum Capacity :
1 - 50 t
Minimum Dead Load :
0 %CN
Rated Output :
CN 1 mV/V
Zero Balance :
<±1 %CN
Temperature Effect on Zero :
<±0,014 %CN / 5 0C
Temperature Effect on Output :
<± 0,0085 %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5 - 15 V
Input Empedance :
RLC 395±30 Ω
Output Empedance :
RO 350±3 Ω
Insulation Resistance :
Ris >1000 MΩ
Load Cell Body :
Nickel plated alloy steel
Environmental Protection :
IP67
Approval :
CE
Our Alternative Products
