EN
SP-1000 TENSION VOLTAGE TESTER
SP-1000 Tension Voltage Tester
Stock Code: 3 SP1000
SP-1000 Tension Voltage Tester is our pen type high voltage detector product developed for the products we want to control voltage.
GENERAL INFORMATION
DEVICE OPERATION
Turn on the device by pressing the power button.
The green LED on the probe will activate.
When approaching the product we want to check the voltage of, if there is high AC voltage, the active green LED will turn off, and the red LED indicating the presence of voltage will light up along with a buzzer warning.
Never use a damaged or broken pen-type high-voltage device (with the antenna part exposed). You may be at risk of electric shock.
We recommend using SP1000 only with PULS ELECTRONIC high-voltage devices (5500VAC power supply, 7500VAC power supply, Antistatic bar and cable, Blower-connected Antistatic bar and cable, Compressor-connected Antistatic bar and cable, Blower and blower cable, Nozzle (since there is a grounded steel spiral on the nozzle cable, measurements cannot be taken on the cable), Antistatic Gun (since there is a grounded cable parallel to the gun's cable, measurements cannot be taken on the cable)).
BATTERY REPLACEMENT INSTRUCTIONS
Before replacing the batteries, turn off the SP1000 using the power button located at the top.
Press the tab located at the top to release the cover.
Pull it upwards to remove it.
Insert the batteries in the direction shown in the diagram.
Replace the cover.
If the batteries are properly inserted and secure, the green LED should light up when you press the power button to turn it on.
Dispose of old batteries in accordance with environmental regulations.
WARNINGS
Do not use the SP1000 if the tip or body is damaged.
There are no repairable parts inside. Do not attempt to repair it.
Do not store or use it under high temperature and humidity.
Always follow safety procedures when working with high voltage.
Our company is not responsible for any issues arising from the use of the device outside the applications specified in the user manual.
ADVANTAGES AND USAGE AREAS
GENERAL FEATURES
Operating voltage range 2.500-10.000VAC
The SP1000 pen type high voltage detector operates on AC voltage only.
Contactless voltage control
Works with 2 1.5V AAA Batteries.
Automatic shutdown
6 hours continuous operation
1.5 years in standby mode
Low battery warning
Protection Class IP54
25X19X140mm
Operating temperature: 0-40 °C
OPERATING VOLTAGE DISTANCES
2.500VAC: 1 mm
3.000VAC: 2 mm
4.000VAC: 6 mm
5.000VAC: 16 mm
6.000VAC: 23 mm
7.000VAC: 30mm
8.000VAC: 36 mm
9.000VAC: 42 mm
10.000VAC: You can control the voltage from a distance of 46mm.
Measurement Range :
0-160 kV
Resolution :
100 V
Accuracy :
Better Than+/-5%
Display :
3 1/2 Dijit,LCD Display
Control :
Push Button
Power Supply :
9 Volt Replaceable battery
Dimensions :
73 x 122 x 30mm
Case Carrying :
Case Supplied
