EN
S TYPE LOAD CELL
ST-2W Series S Type Load Cell
Stock Code: 5 03 STW
ST-2W type loadcells are manufactured from special alloy steel and coated with electrostatic paint in order to increase their resistance to corrosion and industrial conditions. They are loadcells that work in the compression direction with the shear beam principle, are resistant to excessive load or off-axis loads, and are produced for medium and high capacity weighing or force measurements.
GENERAL INFORMATION
ST-2W type loadcells are made of special alloy steel material that isolates it from corrosion and industrial environmental conditions. Operating with shear beam principle and having electrostatically charged paint cover, ST-2W type loadcells were designed for compression applications. They are ideal for middle and high capacity applications or for force meters. 10 Tons capacity for tension applications is available. The ST-2W series load cells highly withstand to overloading and to the effects of off-axis loading.
ADVANTAGES AND USAGE AREAS
GENERAL AREAS OF US
Weigbridges
Silo and tank weighing with middle and high ranges
Material testing machines
CAPACITY
ST-2W series loadcells are produced in 10, 20 ton capacities
CAPACITY
ST-2W series loadcells are produced in 10, 20 ton capacities
Accuracy Class :
C3, C4
Maximum Capacity :
10 ,20 t
Minimum Dead Load :
Emin 0 %CN
Rated Output :
CN 2 mV/V
Maximum Number of Load cell Interval :
nLC C3 (3000), C4 (4000)
Minimum Verification Interval :
Vmin C3 (Emax/10000 ), C4 (Emax/10000 )
Minimum Dead Load Output Return MDLOR :
DR C3 (<+- 0,0167), C4 (+- 0,0125 ) %CN
Zero Balance :
<±1 %CN
Temperature Effect on Zero :
C3 (<± 0,007), C4 (± 0,007 ) %CN / 5 0C
Temperature Effect on Output :
C3 (<± 0,0055), C4 (± 0,0045 ) %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5 - 15 V
Input Empedance :
RLC 380±20 Ω
Output Empedance :
RO 350±3 Ω
Insulation Resistance :
Ris >1000 MΩ
Load Cell Body :
Painted alloy steel
Environmental Protection :
IP67
Cable Type :
2 x 2 x 0,22
Cable Length :
15 m
Our Alternative Products
ST type loadcells are manufactured from special alloy steel for low and medium capacity weighing or force measurements, operating in compression, tensile or both compression and tensile directions with the nickel-plated shear beam principle in order to increase its resistance to corrosion and industrial conditions.
STA loadcells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells are produced for low-capacity weighing or force measurements, operating in compression, tensile or both compression and tensile directions with the bending beam principle.
