ANTI STATIC ELIMINATOR ANTI STATIC BARS
Anti Static Ionizing Bar
Stock Code: 3 KDA75
Among the anti-static inhibitors, the most widely used product in the industry is static electricity receiver-static electricity anti-static bars, called anti-static bars.
SHARE:
GENERAL INFORMATION
"Due to high technologically design used in Anti static eliminator bar it became possible to produce more efficient results to solve the static electric troubles, even in high-speed applications. Anti static ioniser bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti static eliminator will supply machines to perform hygienic, safe and qualitative production. Anti static elimination bar can be designed in different lengths to satisfy the requirements of needs of application. Anti static ionizer bar separates the air molecules to positive and negative ions. Due to principle of work of anti static eliminator the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Anti static ionizer bar is connected to high voltage resistively. There by its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length."
ADVANTAGES AND USAGE AREAS
Advantages of Anti Static Bars
  • Easy to install
  • High Performance
  • Safety
  • Long-Life

  • Usage Areas of Anti Static Bars
  • Anwendungsbereiche
  • Applicazioni
  • Coatnig. laminating
  • Plastic Bag, Sheeting
  • Slitting, wind/Rewind
  • Form Fill seal, Stretch Wraping
  • Wraping machines, Paper production
  • Blown Film, Cast Dilm
  • Extrusion, Flexo Sheet
  • Ingjet, Laser
  • Folding


  • Anti-static rods (Anti-static rod) are used in many applications such as static electricity receivers and static electricity inhibitors.
    Mains Voltage :
    7.5k V. AC.
    Mains Frequency :
    50/60 Hz
    Output Current :
    Less than <5µA
    Length :
    100 - 4000 mm
    Construction :
    Aluminium and PVC
    Emmiters :
    Stainless 304
    Working Distance :
    150 mm
    High Speed Opr. Dist. :
    10-50 mm
    Cable Length :
    2.5m HV Cable
    Ambient Temperature :
    0-80°C
    Ambient Humidity :
    Max. %70 RH
    Weight :
    1 Kg/m
    Dimensions :
    24.8 x 37 mm Profil
    Approval :
    CE
    Short Circuit Protection :
    Effective Distance :
    15-150 mm
    Maunting :

    Pdf dokümanı hazırlanıyor. Lütfen daha sonra tekrar deneyiniz...

    Pdf dokümanı hazırlanıyor. Lütfen daha sonra tekrar deneyiniz...

    It is a power unit designed to be used with static electricity receiver, static electricity prevention equipment such as Anti Static Ionizer Rod, Anti static air gun and Anti static air blower nozzle.
    SEND MESSAGE

    Our Alternative Products

    It is specially designed by using static electricity receiver bars, it is used to remove static electricity, especially in fluid granular materials.
    It is a static electricity receiver inhibitor product especially developed for use in low weight processes, sensitive paper processes, genuine silk woven fabrics, and thin materials such as cigarette papers.
    It neutralizes the static electricity charge formed on the surface with the principle of flowing to the profile through millions of sharp points formed by carbon brushes and thus transmitting it to the ground.
    With its new generation design, embedded microprocessor-controlled power unit and an impact distance of up to 700mm, the antistatic HPR series bar has been the choice of machine manufacturers in particular. It provides an easy ionization solution in high-speed processes, in applications where air is not desired, especially in lines that require food and hygiene, and in applications where long mounting distances are required.