MKLT LoadCell Assembly Kit is produced for mounting of LT series load cells.
EN
SHEAR BEAM LOAD CELL
LT- Series Shear Beam Load Cell
Stock Code: 5 03 LT1
LT-5C loadcells are flat type loadcells that are manufactured from special alloy steel and work in the compression direction with a nickel-plated shear beam principle in order to increase their resistance to corrosion and industrial conditions.
GENERAL INFORMATION
LT series loadcells are single-ended and made of special alloy steel material that isolates it from corrosion and industrial environmental conditions. Operating with shear beam principle, LT Type loadcells are nickel plated. LT type load cells were designed for compression applications. It includes IP67 nipple cable and stainless steel cover that enhances environmental protection. Ex-proof version is available.
ADVANTAGES AND USAGE AREAS
GENERAL APPLICATIONS
Weighing Platforms
Bunker Weighings
Silo and Tank Weighings with low and middle capacities
Dosing System
Packaging and Filling machines
Conveyor Weighings
CAPACITY
LT Series loadcells are produced in 300,500 kg 1,2,3,5 ton
CAPACITY
LT Series loadcells are produced in 300,500 kg 1,2,3,5 ton
Accuracy Class :
C1 , C3
Maximum Capacity :
300 ,500 kg & 1 ,2 ,3 ,5 t
Minimum Dead Load :
0 %CN
Rated Output :
CN 2 mV/V
Maximum Number of Load cell Interval :
nLC C1 (1000), C3 (3000)
Minimum Verification Interval :
Vmin C1 (Emax/5000 ), C3 (Emax/10000 )
Minimum Dead load Output Return MDLOR :
DR C1 (<± 0,050), C3 (± 0,0167 ) %CN
Zero Balance :
<±1 %CN
Temperature Effect On Zero :
C1 (<± 0,014), C3 (± 0,007 ) %CN / 5 0C
Temperature Effect On Output :
C1 (<± 0,0085), C3 (± 0,0055 ) %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5-15 V
Input Empedance :
RLC 380±30 Ω
Output Empedance :
RO 350±3 Ω
Insulation Resistance :
Ris >1000 MΩ
Load cell Body :
Nickel plated alloy steel
Environmental Protection :
IP66
Cable Type :
2X2X0,22
Cable Length :
5 m
Approval :
CE
Our Alternative Products
LTU Series loadcells are plate type load cells manufactured from special alloy steel, coated with nickel in order to increase their resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
LTE Series loadcells are lamella type loadcells. It is manufactured from special alloy steel and works in the compression direction with the nickel-plated shear beam principle in order to increase its resistance to corrosion and industrial conditions.
LTF Series loadcells are plate type load cells that are made of special alloy steel, coated with nickel to increase resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
