LT-5C loadcells are flat type loadcells that are manufactured from special alloy steel and work in the compression direction with a nickel-plated shear beam principle in order to increase their resistance to corrosion and industrial conditions.
EN
SHEAR BEAM LOAD CELL
LTU Series Shear Beam Load Cell
Stock Code: 5 03 LTU
LTU Series loadcells are plate type load cells manufactured from special alloy steel, coated with nickel in order to increase their resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
GENERAL INFORMATION
"LTU Series loadcells are made of special alloy steel and nickel plated against corrosion and industrial conditions working with the shear beam principle in the direction of compression. It includes IP67 nipple cable and stainless steel cover that enhances environmental protection.Its compact structure gives a stable structure to the system mounted on. It can be used along with different mounting kits such as rubber mounting accessories, roller bearing type mounting kits and similar. It is a cost effective model when compared to equivalent products in the market.
ADVANTAGES AND USAGE AREAS
GENERAL AREAS OF US
Weighing platfroms
Silo and tank weighing with low and middle capacities
Dosing System
Packing and filing machines
belt scales
CAPACITIES
LTU series loadcells are produced in 500, 1000, 2000, kg capacities
CAPACITIES
LTU series loadcells are produced in 500, 1000, 2000, kg capacities
Accuracy Class :
C1 , C3
Maximum Capacity :
500 ,1000 ,2000 kg
Minimum Dead Load :
0 %CN
Rated Output :
CN 2 mV/V
Maximum Number of Load cell Interval :
nLC C1 (1000), C3 (3000)
Minimum Verification Interval :
Vmin C1 (Emax/5000 ), C3 (Emax/10000 )
Minimum Dead Load Output Return MDLOR :
DR C1 (<± 0,050), C3 (± 0,0167 ) %CN
Zero Balance :
<±1 %CN
Temperature Effect on Zero :
C1 (<± 0,014), C3 (± 0,007 ) %CN / 5 0C
Temperature Effect on Output :
C1 (<± 0,0085), C3 (± 0,0055 ) %CN / 5 0C
Compensated Temperature Range :
-10/+40 °C
Temperature Range, Safe :
-30/+70 °C
Maximum Safe Overload :
EL 150 %°C
Breaking Load :
Ed 300 %°C
Excitation :
5 - 15 V
Input Empedance :
RLC 380+-30 Ω
Output Empedance :
RO 350+-3 Ω
Insulation Resistance :
Ris >1000 MΩ
Load Cell Body :
Nickel plated alloy steel
Environmental Protection :
IP66
Cable Type :
4 x 0,22
Cable Length :
3 m
Approval :
CE
Our Alternative Products
LTF Series loadcells are plate type load cells that are made of special alloy steel, coated with nickel to increase resistance to corrosion and industrial conditions, and working in the compression direction with shear beam principle.
LTE Series loadcells are lamella type loadcells. It is manufactured from special alloy steel and works in the compression direction with the nickel-plated shear beam principle in order to increase its resistance to corrosion and industrial conditions.
