PLATFORM TYPE LOAD CELL
RT Series Load Cell
Stock Code: 5 03 RT1
RT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.
SHARE:
GENERAL INFORMATION
"RT series loadcells are made of special anodized aluminium alloy that isolates it from corrosion and industrial environmental conditions. Operating with bending beam principle, RT-3C type loadcells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The maximum platform sizes are 60 cm x 60 cm. The sensing element is covered with special silicone that protects it against dust and humidity.
ADVANTAGES AND USAGE AREAS
GENERAL AREAS OF US
  • Packning and filling machines
  • Dosing system
  • Checkweighers, belt scales
  • Tension control
  • Weighing platforms
  • Material testing machines

  • CAPACITY
    RT series loadcells are produced in 100, 300, 600 kg capacities
    Accuracy Class :
    C1, C3
    Maximum Capacity :
    100 ,300 ,600 kg
    Minimum Dead Load :
     0 %CN
    Rated Output :
    CN 2 mV/V
    Maximum Number of Load cell Interval :
    nLC C1 (1000), C3 (3000)
    Minimum Verification Interval :
    Vmin C1 (Emax/5000 ), C3 (Emax/10000 )
    Minimum Dead Load Output Return MDLOR :
    DR C1 (<± 0,050), C3 (± 0,0167 ) %CN
    Zero Balance :
    <±1 %CN
    Temperature Effect on Zero :
    C1 (<± 0,014), C3 (± 0,007 ) %CN / 5 0C
    Temperature Effect on Output :
    C1 (<± 0,0085), C3 (± 0,0055 ) %CN / 5 0C
    Compensated Temperature Range :
    -10/+40 °C
    Temperature Range, Safe :
    -30/+70 °C
    Maximum Safe Overload :
    EL 150 %°C
    Breaking Load :
    Ed 300 %°C
    Excitation :
    5-15 V
    Input Empedance :
    RLC 395±30 Ω
    Output Empedance :
    RO 350±3 Ω
    Insulation Resistance :
    Ris >1000 MΩ
    Load Cell Body :
    Anodized Aluminium alloy
    Environmental Protection :
    IP67
    Cable Type :
    2 x 2 x 0,22
    Cable Length :
    3 m
    Approval :
    CE

    Pdf dokümanı hazırlanıyor. Lütfen daha sonra tekrar deneyiniz...

    Pdf dokümanı hazırlanıyor. Lütfen daha sonra tekrar deneyiniz...

    SEND MESSAGE

    Our Alternative Products

    PL type loadcells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
    BT type load is a special steel body loadcell that works with the bending beam principle and has a high weighing performance.
    PS type loadcells are manufactured from special alloy aluminum and coated with anodizing in order to increase their resistance to corrosion and industrial conditions. These load cells work in compression, tensile or both compression and tensile directions with the bending beam principle.
    MT type load cells are manufactured from special alloy aluminum and coated with anodizing to increase their resistance to corrosion and industrial conditions. These loadcells work in compression, tensile or both compression and tensile directions with the bending beam principle.